Mackie Onyx 32.4 Premium 32-Channel Analog Live Sound Mixing Console

Mackie Onyx 32.4 Premium 32-Channel Analog Live Sound Mixing Console

The new Onyx 32.4 live sound mixing console upgrades the performance and functionality of the legendary Mackie SR32•4 while retaining its convenient 32-channel footprint.

The greatly enhanced Onyx feature set includes 100mm Panasonic faders, all-new mic preamps, completely redesigned analog circuitry, new Perkins EQ, and a built in assignable stereo compressor/limiter section - all at a price that won't break the bank.

All-new design for superior sound
In developing the Onyx 32.4, Mackie's team of analog engineers utilized the highest-quality components available - from premium op-amps to IC chips costing exponentially more than those used in previous designs. All-new summing bus circuitry was designed from the ground up to maximize headroom, and the entire signal chain was electronically balanced from input to output, offering big, full-range sound and lower noise than any mixer in it's class. Most significantly, premium Onyx mic preamps, Perkins EQ circuitry, and a new THAT Corporation 4301 assignable stereo compressor/limiter chip were custom tailored specifically for the Onyx 32.4.

Boutique quality preamps
Although Mackie's previous-generation XDR mic preamps set new standards for both quality and performance, the next-generation Onyx mic preamps offer even greater fidelity, headroom and transparency - as well as better radio frequency (RFI) rejection and wider dynamic range than ever before. With specs like 123dB total dynamic range, -129.5 dBm equivalent input noise, and 0.0007% total harmonic distortion, Onyx preamps can easily hold their own against boutique standalone preamps.

Perkins EQ: "British" sound with greater filter control
Mackie enlisted veteran audio engineer Cal Perkins to develop the EQ circuitry for the Onyx 32.4. Perkins EQ circuitry takes the classic Wein Bridge circuit topology used in British mixing desks of the '60s and '70s and gives it greater filter and phase shift control. The end result is a very effective and extremely musical 4-band EQ with sweepable low- and high-mids - perfect for the throes of live sound mixing.

Assignable onboard stereo compressor/limiter section
Sound engineers have long used master compressor/limiters to smooth out live sound mixes, maximizing the performance of any sound system. Mackie integrated a high-quality master compressor/limiter chip from THAT Corporation into the Onyx 32.4. This assignable analog stereo compressor/limiter chip was designed and manufactured in the US by veteran analog engineers, offering true RMS detection and auto make-up gain for extremely accurate and musical results. It features independent Threshold, Ratio and Fast/Slow Attack controls, and can be assigned post-fader to the L/R main mix (for system limiting and protection) or pre-fader to Group 1/2 or 3/4 outputs (for grouped signal compression, like drums or background vocals). This reduces the hassle and expense of separate outboard processing.

Mackie Onyx 24.4 Premium 24-Channel Analog Live Sound Mixing Console

Mackie Onyx 24.4 Premium 24-Channel Analog Live Sound Mixing Console

The new Onyx 24.4 live sound console upgrades the performance and functionality of the legendary Mackie SR24•4 while retaining its convenient 24-channel footprint.

The greatly enhanced Onyx feature set includes 100mm Panasonic faders, all new mic preamps, completely redesigned analog circuitry, new Perkins EQ, and a built in assignable stereo compressor/limiter section - all at a price that won't break the bank.

All-new design for superior sound
In developing the Onyx 24.4, Mackie's team of analog engineers utilized the highest-quality components available - from premium op-amps to IC chips costing exponentially more than those used in previous designs. All new summing bus circuitry was designed from the ground up to maximize headroom, and the entire signal chain was electronically balanced from input to output, offering big, full-range sound and lower noise than any mixer in its class. Most significantly, premium Onyx mic preamps, Perkins EQ circuitry, and a new THAT Corporation 4301 assignable stereo compressor/limiter chip were custom tailored specifically for the Onyx 32.4.

Boutique quality preamps
Although Mackie's previous generation XDR mic preamps set new standards for both quality and performance, the next generation Onyx mic preamps offer even greater fidelity, headroom and transparency - as well as better radio frequency (RFI) rejection and wider dynamic range than ever before. With specs like 123dB total dynamic range, -129.5 dBm equivalent input noise, and 0.0007% total harmonic distortion, Onyx preamps can easily hold their own against boutique standalone preamps.

Perkins EQ: "British" sound with greater filter control
Mackie enlisted veteran audio engineer Cal Perkins to develop the EQ circuitry for the Onyx 24.4. Perkins EQ circuitry takes the classic Wein Bridge circuit topology used in British mixing desks of the '60s and '70s and gives it greater filter and phase shift control. The end result is a very effective and extremely musical 4-band EQ with sweepable low- and high-mids - perfect for the throes of live sound mixing.

Assignable onboard stereo compressor/limiter section
Sound engineers have long used master compressor/limiters to smooth out live sound mixes, maximizing the performance of any sound system. Mackie integrated a high quality master compressor/limiter chip from THAT Corporation into the Onyx 24.4. This assignable analog stereo compressor/limiter chip was designed and manufactured in the U.S. by veteran analog engineers, offering true RMS detection and auto make-up gain for extremely accurate and musical results. It features independent Threshold, Ratio and Fast/Slow Attack controls, and can be assigned post fader to the L/R main mix (for system limiting and protection) or pre-fader to Group 1/2 or 3/4 outputs (for grouped signal compression, like drums or background vocals). This reduces the hassle and expense of separate outboard processing.

Mast

Mackie Onyx 1640 16-Channel Mixer

Mackie Onyx 1640 16-Channel Mixer

The Mackie Onyx 1640 16-Channel Mixer is a premium 16-channel, 4-bus small-format analog mixer. It features all-new circuitry including 16 boutique-class Onyx mic preamps with 4-band Perkins EQ plus sweepable mids on mic/line channels. A 96kHz FireWire option card (not included) is available for streaming 18 independent channels of audio to your computer with near-zero latency.

Other features include six aux sends with pre/post switches, four stereo line-level inputs, a built-in talkback section for use with internal or external mic, true hardware EQ bypass, and a "Planet-Earth" switching power supply for worldwide use. It's also equipped with individual 48V phantom power switches on all mic inputs, 60mm logarithmic taper faders for smooth, linear fades; balanced direct outs for every channel via DB-25 connections; and selectable instrument inputs on the first two channels, meaning no DI boxes are needed.

Mackie Onyx 1640 16-Channel Mixer Refurb

Mackie Onyx 1640 16-Channel Mixer Refurb

The Mackie Onyx 1640 16-Channel Mixer is a premium 16-channel, 4-bus small-format analog mixer. It features all-new circuitry including 16 boutique-class Onyx mic preamps with 4-band Perkins EQ plus sweepable mids on mic/line channels. A 96kHz FireWire option card (not included) is available for streaming 18 independent channels of audio to your computer with near-zero latency.

Other features include six aux sends with pre/post switches, four stereo line-level inputs, a built-in talkback section for use with internal or external mic, true hardware EQ bypass, and a "Planet-Earth" switching power supply for worldwide use. It's also equipped with individual 48V phantom power switches on all mic inputs, 60mm logarithmic taper faders for smooth, linear fades; balanced direct outs for every channel via DB-25 connections; and selectable instrument inputs on the first two channels, meaning no DI boxes are needed.

Mackie 1604-VLZ3 Premium 16-Channel/4-Bus Compact Mixer

Mackie 1604-VLZ3 Premium 16-Channel/4-Bus Compact Mixer

The Mackie 1604-VLZ3 Premium 16-Channel/4-Bus Compact Mixer builds on the legacy of the best-selling 1604-VLZ Pro mixer. Sixteen studio-quality XDR2 second-generation mic preamps, along with redesigned 3-band active EQ circuitry (with sweepable mids), give the 1604-VLZ3 its greatly enhanced sound quality. All channels feature insert points and line-level inputs for extreme versatility. The unique Rotopod option allows for two different desktop, and three different rackmount configurations. The new multi-voltage power supply allows it to be used anywhere in the world. Ideal for live use, and home and project studios seeking superior performance, the versatile 1604-VLZ3 Compact Mixer is equally at home on the stage or in the studio.

Mackie 808S 8-Channel Stereo Powered Mixer

Mackie 808S 8-Channel Stereo Powered Mixer

The Mackie 808S 8-Channel Stereo Powered Mixer is packed with features but small and light. Twin 600W FR Series amps deliver 1,000W @ 4 ohms and 1,200W @ 2 ohms. They are switchable as mains or mains plus monitors. 8 mic/line channels feature master phantom power, inserts on 1-6. 1/4" stereo inputs on channels 7 and 8, stereo pan control on all 8 channels, true stereo 9-band graphic EQ on mains plus a 9-band for the monitors. 32-bit digital effects processor has 16 effects and 2 parameters per effect, a special EFX WIDE effects-enhancement switch, and ab reak switch to mute channels 1-6 during breaks. It features An external effects section has separate sends and returns plus a footswitch jack to override internal effects. A line-out jack lets you add extra power amps. The 8 mic/line channels feature Mackie's renowned preamps, master phantom power, inserts on 1 through 6, and dual line inputs on channels 7 and 8. Each channel has 3-band EQ.

Mackie Onyx 1620 16-Channel Mixer

Mackie Onyx 1620 16-Channel Mixer

The premium, small format, analog Mackie Onyx 1620 16-Channel Mixer features all-new circuitry. Included are 8 boutique-class Onyx mic preamps with 4-band Perkins EQ plus sweepable mids on mic/line channels. An optional 96kHz FireWire card (not included), supports streaming of 18 independent channels of audio to your computer with near-zero latency. Four aux sends with pre/post switches. Four stereo line-level inputs. Built-in Talkback section for use with internal or external mic. True hardware EQ bypass and "Planet-Earth" switching power supply for worldwide use. Other features include individual 48V phantom power switches on all mic inputs. 60mm logarithmic taper faders for smooth, linear fades. Balanced direct outs for every channel via DB-25 connections. Selectable instrument inputs on the first two channels means no DI boxes are needed.

Mackie 808M 8-Channel Mono Powered Mixer

Mackie 808M 8-Channel Mono Powered Mixer

The ruggedly-built Mackie 808M 8-Channel Mono Powered Mixer is lightweight and easy to use. Twin 600W FR Series amps deliver 1,200 real watts @ 2 ohms and are switchable as mains or mains/monitors. The 8 mic/line channels feature phantom power, inserts on 1 through 6, and dual line inputs on channels 7 and 8. Each channel has 3-band EQ and separate, studio-grade 9-band graphic EQs are provided for mains and monitors. The graphic EQs feature multiple summing amplifiers and precision infinite feedback band-pass filters for superior linear phase and combining properties. They are ultralow noise, low distortion, and sound great. Rugged, injection-molded chassis. Sealed rotary controls resist dirt and dust.

Mackie CFX20 mkII Mixer

Mackie CFX20 mkII Mixer

Upgrades to the Mackie CFX20 mkII Mixer include sleek gray cosmetics, ergonomic knobs, and impact-resistant rubber sides. This live sound mixer features Mackie-designed mic preamps, logarithmic-taper 60mm faders, 9-band phase-accurate graphic equalizer, 32-bit EMAC digital effects processor with 16 effects, 4-bus design, 2 pre/post aux sends, internal/external effects sends, and a host of great features for live sound, including 48V phantom power and 12V BNC lamp connector.

Mackie Onyx 1620 16-Channel Mixer Refurb

Mackie Onyx 1620 16-Channel Mixer Refurb

The premium, small format, analog Mackie Onyx 1620 16-Channel Mixer features all-new circuitry. Included are 8 boutique-class Onyx mic preamps with 4-band Perkins EQ plus sweepable mids on mic/line channels. An optional 96kHz FireWire card (not included), supports streaming of 18 independent channels of audio to your computer with near-zero latency. Four aux sends with pre/post switches. Four stereo line-level inputs. Built-in Talkback section for use with internal or external mic. True hardware EQ bypass and "Planet-Earth" switching power supply for worldwide use. Other features include individual 48V phantom power switches on all mic inputs. 60mm logarithmic taper faders for smooth, linear fades. Balanced direct outs for every channel via DB-25 connections. Selectable instrument inputs on the first two channels means no DI boxes are needed.

Mackie 1642-VLZ3 Premium 16-Channel/4-Bus Compact Mixer

Mackie 1642-VLZ3 Premium 16-Channel/4-Bus Compact Mixer

The Mackie 1642-VLZ3 Premium 16-Channel/4-Bus Compact Mixer extends the legacy of the best-selling 1642-VLZ Pro. Perfectly suited for line-level devices such as keyboards and drum machines, the stereo channels feature four-band fixed EQ, while the mono channels utilize Mackie's proprietary three-band active EQ, with sweepable midrange. Ten XDR2 second-generation mic preamps, along with completely redesigned mix bus circuitry give the 1642-VLZ3 its low-noise, high-headroom functionality and superior sound. The new multi-voltage power supply allows it to be used anywhere in the world. Ideal for home and project studios seeking superior performance, the highly versatile 1642-VLZ3 Premium Compact Mixer is equally at home on the stage or in the studio.

Mackie CFX16 mkII Mixer

Mackie CFX16 mkII Mixer

The Mackie CFX16 mkII Mixer features upgrades that include sleek gray cosmetics, ergonomic knobs, and impact-resistant rubber sides. This live sound mixer features Mackie-designed mic preamps, logarithmic-taper 60mm faders, 9-band phase-accurate graphic equalizer, 32-bit EMAC digital effects processor with 16 effects, 4-bus design, 2 pre/post aux sends, internal/external effects sends, and a host of great features for live sound, including 48V phantom power and 12V BNC lamp socket.

Mackie Onyx 1220 12-Channel Mixer

Mackie Onyx 1220 12-Channel Mixer

The premium Mackie Onyx 1220 12-Channel Mixer is a small-format analog mixer featuring all-new circuitry. Includes 4 boutique-class Onyx mic preamps with 3-band Perkins EQ plus sweepable mids on mic/line channels. An optional 96kHz FireWire card z (not included) is available for streaming 14 independent channels of audio to computer with near-zero latency. Other features include aux sends with pre/post switches, 4 stereo line-level inputs, a talkback section for use with internal or external mics, true hardware EQ bypass, and a Planet-Earth switching power supply for worldwide use. Other features include individual 48V phantom power switches on all mic inputs; 60mm logarithmic taper faders for smooth, linear fades; and balanced direct outs for every channel via DB-25 connections. Selectable instrument inputs on the first 2 channels means no DI boxes are needed.

Mackie CFX12 mkII Mixer

Mackie CFX12 mkII Mixer

The Mackie CFX12 mkII Mixer is designed to make mixing live performances simpler. The mkII upgrades include sleek gray cosmetics, ergonomic knobs, and impact-resistant rubber sides. This live sound mixer features Mackie-designed mic preamps, logarithmic-taper 60mm faders, 9-band phase-accurate graphic equalizer, 32-bit EMAC digital effects processor with 16 effects, 4-bus design, 2 pre/post aux sends, internal/external effects sends, and a host of great features for live sound, including 48V phantom power and 12V BNC lamp socket.

Mackie Power Supply for 8-Bus Mixer

Mackie Power Supply for 8-Bus Mixer

Power supply for a Mackie 8-bus console.

Mackie 406M Powered Mixer

Mackie 406M Powered Mixer

The Mackie 406M powered audio mixer delivers 500 real watts into 2 ohms from twin 250W FR Series High Current power amps, switchable as mains or mains plus monitor. The mixing console provides 6 mic/line channels with inserts, input gain controls with level set LED on each channel, active 3-band EQ on each channel, and 2 separate 9-band graphic EQs for mains and monitors.

Mackie Onyx 1220 12-Channel Mixer Refurb

Mackie Onyx 1220 12-Channel Mixer Refurb

The premium Mackie Onyx 1220 12-Channel Mixer is a small-format analog mixer featuring all-new circuitry. Includes 4 boutique-class Onyx mic preamps with 3-band Perkins EQ plus sweepable mids on mic/line channels. An optional 96kHz FireWire card z (not included) is available for streaming 14 independent channels of audio to computer with near-zero latency. Other features include aux sends with pre/post switches, 4 stereo line-level inputs, a talkback section for use with internal or external mics, true hardware EQ bypass, and a Planet-Earth switching power supply for worldwide use. Other features include individual 48V phantom power switches on all mic inputs; 60mm logarithmic taper faders for smooth, linear fades; and balanced direct outs for every channel via DB-25 connections. Selectable instrument inputs on the first 2 channels means no DI boxes are needed.

Mackie d.2 2-Channel DJ Mixer

Mackie d.2 2-Channel DJ Mixer

The Mackie d.2 professional DJ mixer features superior sound and construction, with dozens of components built from scratch and designed by Mackie's legendary analog engineering team. Plus it's the first DJ mixer to offer a FireWire option card so you can mix music files directly from your PC or Mac or record directly to your computer. The d.2's features include an Infinium optical no-contact crossfader with adjustable tension, Mackie-designed mic and turntable preamps for incredibly low noise and massive punch, and backlit knobs for use in low-light settings. The d.2 also features a clean, intuitive layout; premium analog VCA circuitry; and ultrahigh-performance components. These components include smooth analog EQ with full kill capabilities, 3-position spring-loaded transform switches, and a solid 14-gauge all-steel chassis.

The Infinium crossfader
The revolutionary Infinium optical crossfader delivers precise, ultrasmooth response for years . . . no matter how much you scratch. And without the risk of dust and grime deteriorating its audio performance, this crossfader will sound as good in 10 years as the day you bought your mixer. An adjustable tension control can be set using a small screwdriver, so you can customize the fader feel to be as loose or tight as you desire.

A high-headroom, analog VCA design
The d.2 uses an all-analog Voltage-Controlled Amplifier (VCA) design with ultrahigh-performance components, tuned to provide the maximum headroom and lowest noise of any mixer in its class. Thanks to its VCA design, the d.2 is immune to the deterioration in sound quality plaguing traditional DJ mixers. Dust particles and the general crud of life will wreck old-school faders-but VCA faders power right through these obstacles night after night, year after year, to deliver rock-solid performance with zero audio degradation. VCAs also let you fine-tune the curves of all 3 faders to perfectly suit your style, and even reverse them via conveniently positioned controls.

FireWire computer connection
The d.2 is the world's first mixer with an optional FireWire I/O card for recording and playback of 24-bit audio directly to your computer. With the FireWire card installed, you can connect the d.2 mixer to any Mac or PC (Mac OSX 10.3.5 and higher, Windows XP) to directly play back music from almost any music software application-including Traktor, Serato, Live, iTunes, and Windows Media Player. You just set the input select switch at the top of either or both channels to FireWire and mix 2 stereo tracks directly from your computer.

The FireWire card also lets you simultaneously record your DJ sets to your computer with no additional hardware required. This is perfect for making mix CDs, recording podcasts, and literally dozens of other applications. It's the next step in the evolution of the DJ mixer, and you can only get it with the d.2.

Thought

Mackie 1402-VLZ3 Premium 14-Channel Compact Mixer

Mackie 1402-VLZ3 Premium 14-Channel Compact Mixer

The Mackie 1402-VLZ3 Premium 14-Channel Compact Mixer builds on the legacy of the extremely popular 1402-VLZ Pro, offering the same great feature set, plus greatly enhanced sound quality. Six studio-grade XDR2 (Extended Dynamic Range) second-generation mic preamps, along with Mackie's proprietary active three-band EQ circuitry, give the 1402-VLZ3 its high-headroom, low-noise functionality. With its outstanding sound quality, multi-voltage power supply, and 60mm faders for precise mix control and visibility, the 1402-VLZ3 is the ideal choice for small and medium-sized mixing applications, anywhere in the world.